Intex Excursion Pro Kayak Series

Product Information

If you are kayaking on waterways in England or Wales, then you might need a license (although this is not the case on all UK waterways). It inflates with the double action pump in approximately 15 minutes, including the attachable seats. Rigid testing is performed on all Intex products on a routine basis to make sure they are safe to use. But consumers are also advised to use their products only after reading the user manual. Following the instructions and guidelines set in the user manual is vital to avoid accidents and the misuse and abuse of the products. Conclusion – Intex Excursion Pro Kayak Review

The open construction of the kayak allows easy access to the kayak. Nevertheless, the bottom chamber gives way noticeably when entering the kayak. If you use the deep-water fin, you should only enter the kayak when the water depth is sufficient. The drop-stitch floor has a recess on each side where drain valves are located. For example, if you are paddling on the beach in the summer and a wave does come into the boat, the water will run off when the valves are open. This way no water will accumulate in the boat. Inserted drop-stitch floor with recesses for the drain valves. Some inflatables will be ready to go within as little as 3 minutes, whereas others can take up to 30 minutes depending on how it is being inflated. Even though most inflatable kayaks will take between 3 and 4 PSI in air pressure, they can vary greatly in the amount of time that they take to inflate and deflate. MaterialThis ties in with stability, but you also need to consider how this effects the portability of your kayak. There are a lot of terms used to refer to the parts of a boat, and while they may seem confusing at first, knowing them will help you to better understand each portion of your craft: Both brands offer similar performance characteristics and both are meant for use in sheltered, calm water and on gentle rivers with class II whitewater or less. If stability is important to you then you should consider one of the wider versions of inflatable kayak. They are all built to be stable but broader bottoms will make you feel more secure especially if you have difficulty getting in and out. If you discover the kayak has an air leak, it may not be a deal-breaker. If the leak is a simple pinhole, you can repair the hole using the patch kit provided, or any PVC patch kit. Leaks along the seams of the kayak or at the valves will be more difficult to resolve; pass on any leaking used kayak that you’re not confident about repairing.

This lightweight and foldable kayak has performance closer to that of a hardshell and is a joy to paddle Like other inflatable kayaks, the Intex Challenger K2 kayak is constructed of vinyl plastic with welded seams. This construction is quite durable and resistant to impacts with blunt objects and abrasions. Inflatable kayaks like the Challenger K2 aren’t as stiff as hardshell kayaks, which allows them to flex in the water. This makes the hull durable, but also less efficient to paddle. Narrow, high-pressure air tubes in the floor of the kayak (known as “I-beams”) add rigidity and larger chambers around the perimeter of the hull provide buoyancy.It’s weight capacity can hold up to 400 pounds, making it suitable for solo paddling or for paddling with a partner or child, and still having gear the kayak. Excellent Performance on the Water Adjustable footrests with tough inner liner By now you are probably well aware that inflatable boats are a lot lighter and more portable than their plastic, acrylic or otherwise hard shelled counterparts. Make sure your Intex Challenger K2 modifications don’t impede your ability to enter or exit the kayak. Similarly, avoid modifications that may make the kayak more difficult to handle in wind and waves. Test out any modifications on dry land and critically assess how the changes will affect the kayak’s safety and performance. Setup and assembly