In-line Fuel Filter Upgrade Kit For Eberspacher Webasto Parking Heater Diesel

Product Information

WEEKEND deliveries in the UK may be possible if required at additional cost. For WEEKEND delivery quotation please call our Sales Team prior *

My unit arrived without any sort of exhaust silencer, just the corrugated stainless steel pipe seen in the top left photo. When the diesel heater work, diesel fuel is combusted in the combustion chamber by mixing diesel vapor and air, ignited by the electric plug. The combustion air enters the combustion chamber in the form of spiral airflow, allowing the chamber’s diesel vapor to mix well with the combustion air. But, when the spiral airflow enters the combustion chamber at high speeds, there will be a lot of noise. That’s the main reason why some diesel heaters are noisy. Ordinary diesel heater exhaust pipe This is obvious, but if you don’t do it this way, not only that the heater won’t work properly, but it can be severely damaged, and a short circuit can even burin the main control panel. Therefore, The fuel line that’s coming directly out of the diesel tank is usually a good spot to install a fuel filter.

When it comes to oil pump inlet installation, a common mistake is turning it the wrong way. If the oil pump with the oil inlet is facing down, it will not work evenly, as it’s supposed to. Wrong fuel pump installation position

Contrary to the point from above, some air heaters manufacturers will provide very long cords. However, that can prove to be problematic too, as sometimes the distance between the heater and the control panel/batter is short. Excess cables are coiled and fixed in place This is to keep substances that have settled in the bottom of the tank from being drawn up and clogging the fuel pump. 21. Things To Keep In Mind When Installing The Intake Filter. Another option is to use an L-shaped stainless steel mounting plate, which will allow you to mount the forced air heater upright, even when installing it on a boat. Warmda L-shaped stainless steel mounting plate I’ve been running my portable diesel heater for a few days now and so far I’ve had zero issues with the fuel filter.

Electronics Weekly @ 60!

But, if you don’t have enough room for the fuel pump to be mounted tilted, mounting it horizontally can work too.

When installing a control panel with a built-in temperature sensor, you need to pay attention to the control panel’s location and height. We recommend you to make sure that the heater’s air outlet is not directly facing the control panel. If you install the control panel in front of the air outlet, it is likely to trigger the temperature sensor, and the heater will stop working before the air inside the cabin is at the desired temperature.Furthermore, the constricted space available at the bottom of the heater requires the exhaust pipe to have good bending properties. A spiral exhaust pipe is made of multiple layers of stainless steel sheets that are overlapped and extruded. That allows good maneuverability and saves installation time. 15. Exhaust Port And Spiral Exhaust Pipe Orientation

This adjustment is done through the same electronic control panel as setting the fan speed or thermostatic temperature for normal heating use, but it is not the same thing. Not adjusting the finished installation properly could mean excessive CO production, particulates (soot) in the exhaust, internal clogging, internal over-heating, excessive fuel consumption, unexpected flame-outs or low heat output. I carefully tilted down the tank, which only had about a liter of diesel inside, so it would gravity fill the filter. The problem is that some vehicle maintenance companies are not familiar with diesel heaters. They have employees that don’t know how to fit the fuel filter properly, which causes issues. Fuel outlet and inlet of the fuel filter When choosing the diesel heaters exhaust pipe, you should take one criteria in special consideration – noise. For the best sound deadening, you should use a flexible spiral exhaust pipe. Warmda flexible exhaust pipeThe air should actually blow from the inside to the outside, not the other way around. The distance between the heater air inlet and the wall is not less than 20 cm / 8 inches