Flue Pipe 1000 mm x 4 inch 100 mm Diameter by StoveMaestro Black Stove Pipe for Wood Log Burning Stove

Product Information

The angle of a flue pipe should have a minimum upward slope of 1/4 inch per foot to promote proper venting. A damper is a device used to control airflow in a flue, chimney, or vent. The flue is the pipe or passage through which the combustion gases are vented.

In some cases, a flue may need to be boxed in to meet clearance requirements and protect combustible materials. It is essential to follow local building codes. A larger flue can provide better draft and improve the appliance’s efficiency, but it must be proportionate to the appliance’s BTU output and follow the manufacturer’s recommendations.

A flue pipe can be too large if it exceeds the manufacturer’s recommendations for the appliance’s BTU output and flue height. An oversized flue can cause draft problems and reduce efficiency. The length of a flue pipe can vary depending on the appliance’s BTU rating, the type of fuel used, and the manufacturer’s guidelines. It is essential to follow their recommendations. For a water heater, the size of the chimney liner depends on the BTU rating of the water heater and the height of the chimney. It is essential to follow the manufacturer’s guidelines or consult a professional to determine the appropriate size.

In summer, when the appliance is not in use, it is generally recommended to close the flue to prevent heat loss and avoid drafts. Credit subject to status and affordability. Terms & Conditions Apply. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital UK PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through www.fca.org.uk

A twin wall flue is required when a chimney breast is not already present and cannot be installed. Creating a way to remove emissions from wood burning and multifuel stoves from the building safely. Twin wall flues will heat up when in use as they transport the hot stove gases away from the appliance, the outer part of the flue can be over 90o C or 194o F. The temperature of the twin wall flue will vary depending on: Yes, it is generally recommended to close the flue when the appliance is not in use to prevent heat loss and drafts. The size of a standard water heater vent pipe varies depending on the BTU output of the water heater and the manufacturer’s recommendations. Common sizes include 3 inches and 4 inches in diameter. The smallest flue pipe size used for residential appliances is typically 2 inches in diameter. However, larger sizes are more common for water heaters and heating appliances.