E Cigarette Geekvape Aegis X 200W TC Mod with 2.4 inch OLED screen and IP67 waterproof design including VW/TC/VPC modes no battery no nicotine (Stealth Black)

Product Information

From that menu, use the + or – buttons to select the options in that menu, i.e. different themes or different colors etc.

Tweaking the airflow gave nice results and I found I preferred the airflow half open (or should that be half closed…?). New coils generally last one to two weeks depending on how often they are used and if they are properly broken in. The life of the coils can be extended with proper care and maintenance. The GeekVape Aegis X Tank

The Cerberus sub ohm tank also comes color matched to the Aegis X mod. The e-liquid capacity of the Cerberus is 2ml (EU version), 4ml standard, or a 5.5ml bubble glass addition. As expected, there are various fire modes, variable power (5w – 200w) Temp Control (100c- 315c) and Bypass mode. All the expected safety features are there too, short circuit, battery overvoltage and so on. Cerberus Tank

Hardly ever will a 18650 mod struggle with power delivery and this is the case with the Aegis X as well. Ramp-up time is near-instant and it will put out more power than you can realistically use; up to 200w. The Aegis X will even run down to 0.05 ohms if you’re crazy enough. Temperature control works with a little bit of fiddling, but the hit is consistent enough to call it decent. It’s by no means DNA Replay, but it will suffice. Unfortunately, the large screen does cause additional battery drain and it is very noticeable, so be sure to take that into account if the Aegis X will be your daily mod. Expect about half a day if you’re a chain vaper. Specs: Unfortunately, the user manual doesn’t really tell you much about the different settings and what they do. To give a little insight to what the different options mean, we’ve included a brief description below. Power Mode Geekvape’s branding is kept to a minimum. Their name is printed into the top of the OLED display and the words ‘AEGIS’ are printed in white underneath the +/- buttons.

Two coils are supplied with the Aegis X 200W kit but unfortunately both are the same type, the Mesh X1 KA1 0.2 ohm coil. Geekvape specify the wattage for this coil is between 30W–90W, but best at 60W-80W. Interestingly, the Vaporesso GT CCELL, GT mesh and the Smok Baby coils will also fit this tank. Geekvape Aegis X 200W Mod | Functionality Gradually increasing the wattage in 10W increments, all the way to 80W was amazing. Flavor and vapor was intense but too powerful for me. Fair to say though, I didn’t have any dry hits but did have to keep an eye on the e-liquid level as it was decreasing at an alarming rate. Since it uses 18650 batteries, no portable charger has to be lugged around. Instead, just bring a few extra sets of batteries and a bottle of e-liquid, and whoever is using it is good to go for several days. The GeekVape Aegis X Kit

Either way, unscrew the coil from whatever part it’s still connected to. Re-fit a new coil into the bottom base of the tank ensuring the O-ring is intact on the coil as you screw it in. Don’t over-tighten but ensure it’s firmly in place. The Geekvape Aegis X kit comes with several accessories that are essential to the device’s operation.Selectable as either standard, powerful or soft. Standard will fire at whatever wattage you’ve selected. Soft will give a slow ramp-up to your set wattage. Powerful will act like a pre-heat function, initially firing at a higher wattage then dropping down to your selected wattage. Variable Temperature Control (TC) Firing the Aegis X is carried out by a fairly large bevelled button on the front above the two smaller +/- bevelled buttons. The response and feel of the buttons is very positive with no button rattle at all. A typical slide style box that we’re accustomed to see from china houses the Aegis X and bundled Cerberus tank. Inside the box, you’ll find a micro USB charging cable, a spare coil for your Cerberus, some o-rings and spares as well as some reading material. Fair warning, keep the manual, you’ll need it. The VooPoo Drag 2 is a cool-looking box mod with a lot of great features. It has a good chip and great flavor, and decent cloud production. While using the supplied 0.2 ohm coil, I had no leaks or dry hits and have been using the coil for a week now with no loss of flavor. I was impressed with the flavor and vapor produced from this coil, definitely a thumbs up from me. Temperature Control