IKEA Wood Dowel x10 Pack (IKEA Part #101375)

Product Information

Once you’ve cut through the dowel, gently pry it out of the hole with a screwdriver or similar tool. If necessary, sand down any rough edges on the wood before reassembling your Ikea furniture. Ikea dowels come in a range of sizes. Below is a list of common dowel sizes and part numbers made by Ikea: Simultaneously, the Easy Assembling project started, where the aim was to see how IKEA could make it easier for customers to assemble IKEA furniture. Project leader Christer Collin and innovator Benny Andersson at IKEA also saw the potential, and the wedge dowel solution became an important part of the project.

Wooden dowel stuck : r/IKEA - Reddit Wooden dowel stuck : r/IKEA - Reddit

Yes, we refused to use a knob and the manufacturer refused to accept the keyhole. But we solved it with a long, drawn-out, heated argument,” Marianne laughs.

🍪 Privacy & Transparency

I was thinking a lot about its construction and wondered if you could apply this principle on furniture other than trestles. See, the milled grooves provide tremendous stability,” says Anders. The wedge dowel that Anders and Göran invented together is a solution that may not blow your mind visually, but from an innovation perspective it’s rather fantastic. Firstly, this tiny part cuts the assembly time of IKEA furniture by half. Secondly, all the fittings on machine-made furniture become invisible. Beauty and brains! It was great when our idea got patented, although that was never the motivation,” Göran and Anders agree. “It just felt so good that we had done something that made it easier for the customer. With the wedge dowel you can assemble much faster, but it’s also easier due to the fact that the dowel is fixed to one of the two sides that are going to be assembled. Pretty fail-proof.”

Everything you will ever need to know about Ikea wooden

Read Also: How to Cut Basswood StripsAnother method that you can use is sawing through the dowel with a hand saw or power saw. This method is more likely to damage the surrounding wood, so be very careful when doing this. One method is to use a sharp knife or chisel to score the surface of the dowel pin. This will help break the bond between the dowel pin and the surrounding wood. Read Also: Problems With Valspar PaintFirst, try using a screwdriver or other pointed tool to loosen the dowel from the furniture piece. If that doesn’t work, you may need to use a saw to cut through the dowel. No, glue won't get the dowels out :-) But not using glue can help a lot. Many assemble it yourself pieces of furniture recommend gluing the dowels in place and some even include a little bottle of glue. The glue is usually not necessary for basic functionality (cams, screws, etc. do that) but does help make the furniture a little bit more stable and secure. The glue doesn't just lie between the surfaces (as some adhesives on some surfaces will do) because wood is porous and the glue soaks in (I am sure there is a technical term for that), and I think the dowels, which are often tight-fitting to begin with (by design) may even swell just a little bit from the water in the glue. Which is all great for keeping things together but makes it really hard to cleanly take things apart.

Super siblings

It takes a long time to create something great. I saved the first prototype. Actually I still have all the versions that didn’t really work out. You never know, they might inspire you to do something else later on,” adds Anders Eriksson. Start by lightly tapping the end of the dowel with a mallet or hammer. This will loosen it up and make it easier to remove.

Spare parts - IKEA - IKEA

First, I assembled both the cabinets as per instructions. For the last part instead of putting the top shelf individually on both units, I got a larger wooden plank cut to size from Lowes (84″ length and 8.5″ wide). Just a few hundred steps away from the IKEA prototype shop were the desks of designers Knut Hagberg and Marianne Hagberg. Brother and sister, both are furniture designers and interior decorators. Both wild and creative. And always working as a team. Marianne Hagberg says, “We were both hired in 1979 and our first assignment was to ‘do great things’.” If you’re looking to remove a wooden dowel from IKEA furniture, there are a few things you’ll need to know. First, it’s important to understand that IKEA furniture is not designed to be disassembled and reassembled multiple times. This means that the wooden dowels holding the furniture together are meant to be permanent fixtures. Once you have scored the surface of the dowel pin, try prying it out with a screwdriver or another tool. You may also be able to grip the end of the dowel pin with pliers and pull it out.

Democratic Design

Instead of a knob for the drawer we wanted a keyhole. My god how we fought for that!” Knut Hagberg remembers. Start by using a sharp knife or saw to cut through the top of the dowel flush with the surface of the wood. First, drill a small pilot hole into the center of the dowel pin using a bit that is smaller than your final drill bit size. Then, switch to a larger drill bit and carefully drill through the center of the pilot hole until you reach the other side of the dowel pin. Be careful not to damage the surrounding wood as you drill. How Do You Remove Glued Wooden Dowels? You will need to use a sharp chisel and be very careful not to damage the surrounding wood. First, make a small pilot hole in the center of the dowel with the tip of the chisel. Next, insert the chisel into the pilot hole and start prying up on the dowel.