NRS Healthcare Magnetic Door and Window Alarm - Pack of 3

Product Information

Test the alarm with the new sensitivity adjustments. Open and close the door slowly. No alarm? Then, readjust the sensitivity. Repeat until you find a suitable level. You can also use them in residential settings for garage doors or other types of doors that use a rolling mechanism. Recessed Sensors Also, such early detection of unauthorized access provides valuable time to call the police or take other measures to protect your home. Keep Loved Ones In

Once both components are in place, test by opening and closing the door to ensure the sensors are fastened and working properly. When an intruder enters or attempts to force open a door and an alarm goes off, the loud noise gets everyone's attention to a potential break-in.As mentioned earlier, your door alarm sensitivity level may cause an undetected intrusion or a wind-triggered alarm. Each door and window alarm offers its own unique benefits. Here are some of the characteristics you might want to look for when you shop for alarms: Hence, we recommend door alarms for homeowners seeking bare-boned protection on a budget. Easy Installation

BA11-201, FL – BAEG13000404, GA – BLLVA205866, IA – BAAC0129, IL – BA127001452, IN – BALAC000190, MD Insert the screws into the pilot holes and drill in with a screwdriver or a drill. Be careful not to overtighten the screws, as this could damage the sensor or the mounting surface. Carefully position the sensor on your door or frame. Press firmly on the sensor to ensure a good bond with the tape. Ensure the sensor and magnet align correctly. Magnetic door alarms come in different designs, each made to offer a specific solution. Let’s go over the popular options on the market:For irregular moldings like decorative or crown moldings, a reverse placement— sensor on the door, magnet on the molding—may work better. Adjusting Sensitivity Levels When the roller door is shut, the ball bearing is held in place and keeps the circuit closed. When the door opens, the ball bearing releases and opens the circuit, triggering an alarm. License Numbers: Safe Streets USA License Numbers: WA – SAFESSU854P8, EC – SAFESSU846BO, OR – 208546 Drill pilot holes with a drill bit slightly smaller than the screws you will use. This will help prevent the wood or other material from splitting when you insert the screws.

Neighboring residents do not only help deter intruders and prevent crime; they collaborate to investigate and report any suspicious activity to the police. So, if you have windows that could be potential break-in points, consider installing magnetic window alarms.

Thankfully, most magnetic door alarms are designed for DIY homeowners, ruling out installation hassles. With out-of-box manuals and comprehensive user guides, it’s easy to install and configure most magnetic door alarms. You can also use the provided screw to fasten the two parts of the alarm system to the door and frame. See how it works: